Kraus, G. Steels: transformation, structure and performance (ASM International, 2005).
Bhat, BN Aerospace materials and applications Flight. 255 (American Institute of Aeronautics and Astronautics, 2018).
Bajaj, P. et al. Steels in additive manufacturing: a review of their microstructure and properties. Mater. Science. Eng. A 772(2020).
Felli, F., Brotzu, A., Vendittozzi, C., Paolozzi, A. & Passeggio, F. Damaged surface wear of an EN 3358 stainless steel aeronautical component subject to sliding. Fraternity. Ed. Integrita Strutt. 23127–135 (2012).
Deb Roy, T. et al. Additive manufacturing of metal components – Process, structure and properties. Program. Mater. Science. 92112–224 (2018).
Herzog, D., Seyda, V., Wycisk, E. & Emmelmann, C. Additive manufacturing of metals. (2016). https://doi.org/10.1016/j.actamat.2016.07.019.
ASTM International. Standard terminology for additive manufacturing technologies. Quick manufacturing. Assoc. https://doi.org/10.1520/F2792-12A.2 (2013).
Bartolomeu, F. et al. Mechanical and tribological behavior of 316L stainless steel – A comparison between selective laser melting, hot pressing and conventional casting. To add. Fab. 1681–89 (2017).
Bahshwan, M., Myant, CW, Reddyhoff, T. & Pham, MS The role of microstructure on wear mechanisms and anisotropy of additively fabricated 316L stainless steel in dry slip. Mater. Of the. 196109076 (2020).
Boegelein, T., Dryepondt, SN, Pandey, A., Dawson, K. & Tatlock, GJ Mechanical response and deformation mechanisms of ferritic oxide dispersion reinforced steel structures produced by selective laser melting. Acta Mater. 87201-215 (2015).
Saeidi, K., Alvi, S., Lofaj, F., Petkov, VI, and Akhtar, F. Advanced mechanical strength in room and elevated temperature post-heat-treated SLM 2507 promoted by hard/ductile sigma precipitates. Metals (Basel). 9(2019).
Lashgari, HR, Kong, C., Adabifiroozjaei, E. & Li, S. Microstructure, post-heat treatment response, and tribological properties of 3D printed 17-4 PH stainless steel. Wear 456–457(2020).
Liu, Y., Tang, M., Hu, Q., Zhang, Y. & Zhang, L. Densification behavior, microstructural evolution and mechanical properties of TiC/AISI420 stainless steel composites fabricated by selective laser melting. Mater. Of the. 1871–13 (2020).
Zhao, X. et al. Manufacture and characterization of AISI 420 stainless steel by selective laser melting. Mater. Fab. Treat. 301283-1289 (2015).
Sun, Y., Moroz, A. & Alrbaey, K. Sliding wear characteristics and corrosion behavior of selective laser fused 316L stainless steel. J. Mater. Eng. Perform. 23518–526 (2013).
Shibata, K. et al. Friction and wear behavior of stainless steel produced by the powder bed fusion process under oil lubrication. Tribiol. Int. 104183-190 (2016).
Li, H., Ramezani, M., Li, M., Ma, C., and Wang, J. Tribological performance of selective laser fused 316L stainless steel. Tribol. Int. 128121-129 (2018).
AlMangour, B., Grzesiak, D., and Jenn-Ming, Y. Selective laser melting of TiC-reinforced 316L stainless steel matrix nanocomposites: Influence of starting TiC particle size and volume content. Mater. Of the. 104141-151 (2016).
AlMangour, B., Grzesiak, D. & Yang, J.-M. Rapid fabrication of bulk TiB2/316L stainless steel nanocomposites with novel reinforcement architecture and improved performance by selective laser melting. J. Compd Alloys. 680480–493 (2016).
Zo, Y. et al. Additively manufactured SiC reinforced stainless steel with excellent strength and wear resistance. To add. Fab. 41101971 (2021).
Körner, C. Additive Manufacturing of Metallic Components by Selective Electron Beam Melting – A Review. Int. Mater. Round. 61361–377 (2016).
Rahmati, S. Direct Rapid Tooling. Mater complete. Treat. https://doi.org/10.1016/B978-0-08-096532-1.01013-X (2014).
Rännar, LE, Koptyug, A., Olsén, J., Saeidi, K. & Shen, Z. Hierarchical structures in 316L stainless steel fabricated by Electron Beam Melting. To add. Fab. 17106-112 (2017).
Zhong, Y. et al. Additive manufacturing of 316L stainless steel by electron beam melting for nuclear fusion applications. J. Nucl. Mater. 486234-245 (2017).
Olsén, J., Shen, Z., Liu, L., Koptyug, A. & Rännar, LE Micro- and macro-structural heterogeneities in 316L stainless steel prepared by electron beam melting. Mater. Character. 1411–7 (2018).
Segura, Iowa et al. Characterization and Mechanical Properties of Clad 316L Stainless Steel for Nuclear Applications Fabricated by Electron Beam Melting. J. Nucl. Mater. 507164-176 (2018).
Kumar, R., Antonov, M., Beste, U. & Goljandin, D. Evaluation of 3D printed steels and composites for wear applications under abrasive, dry or suspension erosive conditions. Int. J. Refract. Meet. Hard material. 86105126 (2020).
Schneider, CA, Rasband, WS & Eliceiri, KW NIH Image to ImageJ: 25 years of image analysis. Nat. Methods 9671–675 (2012).
Mucha, K., Augustyn-nadzieja, J., Szczotok, A. & Krauze, K. An improved procedure for quality control of sintered carbide tips for mining applications, based on quantitative image analysis of the microstructure. Materials (Basel). 141–16 (2021).
ASTM International. Standard Test Method for Microindentation Hardness of Materials. (2016). https://doi.org/10.1520/E0384-17.
Iakovakis, E., Roy, MJ, Gee, M. & Matthews, A. Evaluation of wear mechanisms in additive-made carbide-rich tool steels. Wear 462–463203449 (2020).
ASTM International. Standard test method for wear by reciprocating linear sliding of the ball on the flat. ASTM Int. 051–10 (2018).
Iakovakis, E., Avcu, E., Roy, MJ, Gee, M. & Matthews, A. Dry-sliding wear behavior of CrC-rich, additive-made WC-Co cemented carbides. Wear 486–487204127 (2021).
Stachowiak, GW and Batchelor, AW Eng. Tribol. III (2014). https://doi.org/10.1016/b978-0-12-397047-3.00019-9.
Roy, M. HardnessMap. (2016). 10.5281/ZENODO.54761.
Triani, RM et al. Improvement of the tribological characteristics of AISI 8620, 8640 and 52100 steels by thermo-reactive treatments. Lubricants seven(2019).
Gonzalez-Pociño, A., Alvarez-Antolin, F. & Asensio-Lozano, J. Optimization of quenching and tempering parameters for precipitation of M7C3 and mc secondary carbides and removal of retained austenite in steel with tools vanadis 10. Metals (Basel). 9(2019).
Chong, X., Jiang, Y., Zhou, R. & Feng, J. The effects of ordered carbon vacancies on the stability and thermomechanical properties of v8C7 relative to VC. Sci. representing 6(2016).
Wu, L. et al. Understanding the mechanical properties of vanadium carbides: nano-indentation measurement and first principles calculations. J. Compd Alloys. 54860–64 (2013).
Li, Y. et al. The electronic, mechanical properties and theoretical hardness of chromium carbides by first principle calculations. J. Compd Alloys. 5095242–5249 (2011).
Suh, NP & Sin, HC The genesis of friction. Wear 6991-114 (1981).
Alvi, S., Saeidi, K. & Akhtar, F. High-temperature tribology and wear of Selective Laser Fused (SLM) 316L stainless steel. Wear 448–449203228 (2020).
Kc, S. et al. Tribological behavior of 17–4 PH stainless steel fabricated by traditional manufacturing and laser-based additive manufacturing methods. Wear 440–441203100 (2019).
Huth, S., Krasokha, N. & Theisen, W. Development of wear and corrosion resistant cold work tool steels produced by diffusion alloying. Wear 267449–457 (2009).
Dilawary, SAA, Motallebzadeh, A., Afzal, M., Atar, E. & Cimenoglu, H. Laser Surface Fusion of 10 wt% Molybdenum Stellite Alloyed Hard Coatings 12 Plasma Transferred Arc Deposition: structural evolution and high temperature wear performance. Opt. Laser technology. 101404–412 (2018).
Gilewicz, A. & Warcholinski, B. Tribological properties of CrCN/CrN multilayer coatings. Tribol. Int. 8034–40 (2014).
Yang, Y., Zhu, Y., Khonsari, MM, and Yang, H. Wear anisotropy of selective laser fused 316L stainless steel. Wear 428–429376–386 (2019).
Moore, MA & Douthwaite, RM Plastic deformation under worn surfaces. Metall. Trans. A seven1833–1839 (1976).
Alpas, AT, Hu, H. & Zhang, J. Plastic deformation and damage accumulation under worn surfaces. Wear 162–164188–195 (1993).
LeBrun, T., Nakamoto, T., Horikawa, K. & Kobayashi, H. Effect of retained austenite on subsequent heat treatment and resultant mechanical properties of selectively laser fused 17–4 PH stainless steel. Mater. Of the. 8144–53 (2015).
Soleimani, M., Kalhor, A. & Mirzadeh, H. Transformation Induced Plasticity (TRIP) in Advanced Steels: A Review. Mater. Sci. Eng. A 795140023 (2020).